Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Headlamp Bulb on a Fiat 500L

Model: Fiat 500 500 L - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight

See other generations:
Video tutorial

In this video, you will see how to change the blown bulb of the front headlamp on a Fiat 500L: first, open the front bonnet by releasing the catch from the lever located on the driver's side, at the bottom of the footwell, near the door. The first step is to locate the bulb to be replaced and remove the rubber protective cap covering the socket and bulb holder.

You can access it directly from the engine compartment without needing to disassemble anything. Once the damaged bulb is removed, replace it with the new one, but remember never to touch the glass bulb with bare hands, as this can reduce the lifespan of the bulb.

Refit the rubber cap and close the bonnet. Task completed.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Fold Down the Rear Seats of a Fiat 500L
How to Fold Down the Rear Seats of a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before starting, open the rear doors and the boot of your Fiat 500L. Begin by unfastening and removing the upper cover of the boot, disconnecting the…
How to Fold Down the Rear Seats of a Fiat 500L
How to Fold Down the Rear Seats of a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before starting, open the rear tailgate of the boot of your Fiat 500L. First, unclip the two cords of the parcel shelf, then dislodge and remove the …
Changing the Number Plate Light on a Fiat 500L
Changing the Number Plate Light on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Today, change the number plate lights on a Fiat 500L. First, obtain a suitable screwdriver or, as shown in the video description, a battery-powered s…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos