Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Replacement of the air filter of the Fiat 500 L - 500 X

Fiat 500 - Video tutorial

Model: Fiat 500 500 L - Years 2012-2023
Part: Air filter
Operation: Replacement of the air filter of the Fiat 500 L - 500 X

Today we will see, in this video tutorial, how to remove and replace the engine air filter of the Fiat 500 L 1.3 Multijet, but also of the 500 X. First we open the bonnet and start by removing the upper plastic protection of the engine ; after which we unscrew the screws of the air filter cover, disconnecting the suction sleeve, as shown in the video. At this point we remove the air filter and replace it with the new one, of the right type; insert it correctly inside the filter box and reassemble everything, applying the reverse procedure.


Posted on 8 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2021 - Where is the cabin filter located in the Fiat 500? Read Answer
    • 500 2014-2022 - Where is the Fiat 500x cabin air filter located? Read Answer
    • 500 2014-2022 - Costs for replacing engine and passenger compartment air filters for Fiat 500 x mjt? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos