Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Fiat 500 Abarth?

Model: Fiat 500 312 - Years 2007-2024
Part: Air filter

Today's instructions will show you how to remove and replace the engine air filter on the Fiat 500 Abarth in simple steps. First, open the bonnet of the vehicle and begin unscrewing all the fastening screws found on the side of the air filter cover; then remove the cartridge from the filter box located underneath, as shown in the video. At this point, insert the new air filter in the correct orientation, cleaning the filter box of any residual dirt; all that remains is to install the air filter cover!

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in the Fiat 500 Abarth
How to Replace the Cabin Air Filter in the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) If you own a Fiat 500 Abarth (2007-2023) and want to learn how to replace the cabin air filter, read this guide carefully and follow the steps descri…
How to Replace the Air Filter in a Fiat 500 ABARTH (312)
How to Replace the Air Filter in a Fiat 500 ABARTH (312)
Fiat 500 (2007-2022 / ) In this video tutorial, you can see how to replace the air filter in a Fiat 500 ABARTH (312) by following some simple steps: the first thing to do is…
How to Recharge the Air Conditioning Gas of the Fiat 500 Abarth
Fiat 500 (2007-2022 / ) Today's guide will show you the steps to recharge the air conditioning gas of the Fiat 500 Abarth. First, open the bonnet of your car and begin unscr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos