Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2024
Part: Cabin air filter

If you own a Fiat 500 Abarth (2007-2023) and want to learn how to replace the cabin air filter, read this guide carefully and follow the steps described. First, turn off the car and move to the passenger side. Next, remove the plastic cover located at the bottom left of the dashboard. Once this is done, also remove the panel located beneath the glove compartment. Finally, locate the air filter and replace it with a new one.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Fiat 500 Abarth?
How to Replace the Air Filter on the Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) Today's instructions will show you how to remove and replace the engine air filter on the Fiat 500 Abarth in simple steps. First, open the bonnet of …
How to Replace the Air Filter in a Fiat 500 ABARTH (312)
How to Replace the Air Filter in a Fiat 500 ABARTH (312)
Fiat 500 (2007-2022 / ) In this video tutorial, you can see how to replace the air filter in a Fiat 500 ABARTH (312) by following some simple steps: the first thing to do is…
How to Recharge the Air Conditioning Gas of the Fiat 500 Abarth
Fiat 500 (2007-2022 / ) Today's guide will show you the steps to recharge the air conditioning gas of the Fiat 500 Abarth. First, open the bonnet of your car and begin unscr…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos