|
Do it yourself
| |||
| ||||
How to install a light in the glove compartment of the Fiat Grande Punto
Model: Fiat Punto
MK 3, Punto EVO, 199, Grandepunto
- Years 2005-2018
As strange as it may seem, the glove compartment of the Fiat Grande Punto does not have a courtesy light, but the youtuber will help you install one: what we need is a LED strip, which can be easily found on any e-commerce platform for a few euros; it is cut to size, where there are the two little circles, which are a positive and a negative pole, to which we will connect two wires, the red one on the plus and the black one on the minus. To turn on the light when the little door is opened, a switch has also been installed, which activates the circuit when the door is opened. The power is taken from the battery, but it is advisable to always take it through a 10 Ampere fuse that has been placed near the fuses in the cabin compartment. It would be possible to take power from the cigarette lighter as well, but if you open the drawer with the engine off, it will not light up.
Posted on 23 February 2025 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
To install an H4 LED bulb (dipped and main beam) on a Fiat Grande Punto, start by removing the rubber cap at the back of the headlamp, disconnect the…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
In today's tutorial video, you will see how to remove the side indicator light from a Fiat Grande Punto, Punto Evo, or Punto Abarth. First, obtain a …
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
Today, you will learn how to remove and replace the lens of the side indicator bulb on a Fiat Punto and Grande Punto. First, remove the old lens by g…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.106
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
