Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to solve the problem of the glove compartment of the Fiat Grande Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Handle
Operation: How to solve the problem of the glove compartment of the Fiat Grande Punto

In this video tutorial you can see how it is possible to solve the problem of the Fiat Grande Punto glove compartment that does not close. If you have noticed that the glove compartment of your Fiat Grande Punto does not close. First you need a Torx 25 wrench. Next step, you have to open the glove compartment and loosen the two screws located in the upper part of the compartment (As shown in the video, there is no need to unscrew them completely; now you have to take the hook and move it all the way back; then at this point you have to fix the screws again. With pliers you can bend the iron clamp inwards, without forcing too much because it could break. Now try to open and close the drawer and you will see that it it will close well.


Posted on 20 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - The rear door handle of my Fiat Grande Punto does not open, how can I fix it? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos