Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Handle

Fiat Punto - Handle

Fiat Punto (1999-2011 / 188, MK 2)
How do you replace the external handle of the Fiat Punto?
In order to replace the external handle of the Fiat Punto door, you first need to detach the inner panel of the door itself: start by removing the speaker …read all…
Posted on 29 July 2023 by ScegliAuto
Fiat Punto (1999-2011 / 188, MK 2)
How to remove the external door handle of the Fiat Punto
Let's find out in this guide how to remove and replace the external door handle of the Fiat Punto, following the instructions below. First we open the front …read all…
Posted on 24 September 2022 by ScegliAuto
Fiat Punto (1999-2011 / 188, MK 2)
How do you replace the inside handle of the Fiat Punto?
In order to replace the inside handle of the Fiat Punto, the door panel corresponding to the handle to be replaced must be removed. Once the panel has been …read all…
Posted on 27 August 2022 by ScegliAuto
Fiat Punto (2005-2018 / Puntoevo, Grandepunto, MK 3, 199)
How to replace the rear handle of the Fiat Grande Punto
If we have to disassemble and reassemble the rear handle on this car, we can find the instructions below and also take a look at the video. First of all it is …read all…
Posted on 17 November 2022 by ScegliAuto
Fiat Punto (2005-2018 / Puntoevo, Grandepunto, MK 3, 199)
How to solve the problem of the glove compartment of the Fiat Grande Punto
In this video tutorial you can see how it is possible to solve the problem of the Fiat Grande Punto glove compartment that does not close. If you have noticed …read all…
Posted on 20 April 2024 by ScegliAuto
Fiat Punto (2005-2018 / Puntoevo, Grandepunto, MK 3, 199)
How to replace the external door handle of the Fiat Grande Punto?
In order to replace the external door handle of the Fiat Grande Punto, the internal door panel must be removed by loosening its fixing screws and disconnecting …read all…
Posted on 15 March 2024 by ScegliAuto
Fiat Punto (1999-2011 / 188, MK 2)
Replace the driver's side interior handle on a Fiat Punto
Do you want to replace the driver's side internal handle on a Fiat Punto? In this detailed video we see briefly how to disassemble and remove it from the door …read all…
Posted on 25 November 2023 by ScegliAuto
Fiat Punto (2005-2018 / Puntoevo, Grandepunto, MK 3, 199)
How to remove and replace the upper internal handle of a Fiat Grande Punto
Let's see how to remove and replace the inside handle of a Fiat Grande Punto. Very easy operation if you follow the right steps. First of all, we remove the …read all…
Posted on 25 November 2023 by ScegliAuto
Fiat Punto (2005-2018 / Puntoevo, Grandepunto, MK 3, 199)
How to remove the front door handle of the Fiat Grande Punto
The problem of the difficulty of opening the doors from the outside is quite well known on this model and is generated by an extension of the cables that …read all…
Posted on 9 November 2023 by ScegliAuto
Accelerator (1) Cigarette Lighter (4) Airbags (16) Alternator (7) Loudspeaker (11) Shock absorbers (19) Antenna (8) Air conditioning (5) Car stereo (50) Anti roll bar (1) Roof Rack Bars (5) Battery (26) Coil (2) Air Vents (6) Arm (11) Gearbox (13) Spark plugs (27) Glow plugs (10) Carburetor (1) Bodywork (10) Glove box (5) Control unit (8) Key (25) Timing belt (29) V-belt (6) Air conditioning (1) Air conditioning controls (5) -board computer (17) Checks and maintenance (115) Oil pan (4) Throttle body (7) Dashboard (17) Gearshift gaiter (2) Drive shaft boot (2) Bearing (6) Brake discs (11) Electric fan (1) Side indicator light (2) Headlight (27) Tail light (24) Fog lights (12) Air filter (34) Cabin air filter (38) Petrol filter (4) Diesel filter (28) Oil filter (11) Hand brake (10) Clutch (13) Grille (2) Injectors (8) Window lift switch (2) Accessory Kit (9) Light bulb (19) Side turn signal light bulb (8) Headlight bulb (51) Rear light bulb (25) Interior lights ceiling light bulb (11) Antifreeze liquid (7) Dashboard light (7) License plate light (8) Third brake light (6) Rear window (2) Handle (9) Muffler (6) Engine (11) Window motor (11) Starter motor (11) Power Steering Motor (4) Gear oil (4) Brake oil (4) Engine oil (20) Door panel (42) Windshield (1) Front bumper (17) Rear bumper (10) Brake pads (30) Hydraulic pistons (5) Tires (2) Gear Shift Knob (17) Pump (14) Fuel pump (16) Door (9) Push button (3) Window lift button (3) Instrument cluster (14) Radiator (9) Passenger compartment heating radiator (8) Wheel (4) Fuse box (54) Seat (29) Drive shaft (1) Crankshaft RPM sensor (4) Coolant temperature sensor (3) Parking sensors (1) Lock (21) Lambda sensor (2) Suspensions (4) Outside rearview mirror (32) Interior rearview mirror (1) Manufacturer's coat of arms (5) Engine mount (5) Drums and shoes (4) Windscreen wipers (25) Thermostat (11) Engine head (6) Steering rods (2) Brake oil pipes (1) Oil vapor pipes (1) Central tunnel (4) Windshield washer nozzle (3) Valve (3) EGR valve (9) Interior blower (12) Side window (4) Steering wheel (18)

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos