Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Driver's Side Interior Handle on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Handle

Want to replace the driver's side interior handle on a Fiat Punto? In this detailed video, see how to remove it from the door housing. To disassemble the lock, you need a screwdriver: unscrew the screws inside the handle as shown in the video (remove the screw covers). Disconnect the handle and pull it out from the door opening lever (replace it if damaged). Insert the new part into the door (as shown in the video). Finally, fit the handle and tighten the screws with the screwdriver used earlier.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Internal Handle on a Fiat Punto?
How to Replace the Internal Handle on a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the internal handle on a Fiat Punto, remove the door panel corresponding to the handle you wish to replace. Once the panel is detached aft…
Removing the Door Panel and Handle on a Fiat Grande Punto
Removing the Door Panel and Handle on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, you will learn how to remove the front door panel and the external handle on a Fiat Grande Punto. First, remove the door panel by u…
How to Replace the External Door Handle on a Fiat Grande Punto?
How to Replace the External Door Handle on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the external door handle on a Fiat Grande Punto, remove the inner door panel by loosening its fixing screws and disconnecting the connecto…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos