Do it yourself
Frequently asked questions about cars and motorcycles

How to repair a chronic defect of the Fiat Grande Punto that doesn't work: the rear door handles

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Handle

See other generations:
Video tutorial

In this video we can see how to solve a chronic problem of the Fiat Grande Punto, especially in the early years of production, that is the locks of the rear doors: the defect is the space that is created between the lever moved by the handle, and the plastic piece that pulls the cable that then releases the door.

The repair consists in adding a substantial thickness to the lever arm. Actually removing the panel and removing the lock is not difficult, just remove the visible screws and remove the fixing screw of the handle.

You will definitely find a dedicated tutorial on our platform. Let's focus on reassembly instead: we need to fit the lever into the hole shown by the youtuber in the video.

Once it is fitted, tighten the 8mm nut, holding the handle steady from the other side, and then the 13mm nut on the other side. Let's also reassemble the cable sliding bar, held in place by two 10mm bolts.


Posted on 22 July 2025 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to reset and repair the non-functioning window switches on the Fiat Grande Punto, due to intermittent oper…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's instructions will show you how to repair the fuel cap on a Fiat Grande Punto, as well as on the Punto Evo. First, open the fuel flap and star…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's video tutorial shows you how to dismantle and repair (or replace) the window regulator motor of the Fiat Grande Punto, as well as the Punto E…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos