Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change or Repair the Window Regulator Motor of the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

Today's video tutorial shows you how to dismantle and repair (or replace) the window regulator motor of the Fiat Grande Punto, as well as the Punto Evo. First, get inside the vehicle and start by removing the door panel; to do this, unscrew all the screws you find on it, disconnecting the handle cable and the electrical connector of the window switch, as shown in the video.

At this point, unscrew the screws of the window regulator motor, also disconnecting the wiring and the side glass; proceed with the repair or directly replace it!


Updated on 11 October 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of the Fiat Grande Punto
Removing the Door Panel of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Briefly follow the instructions to remove and replace the door panel of the Fiat Grande Punto, as well as the Punto Evo. First, open the door and beg…
How to Replace the Window Regulator on the Fiat Grande Punto?
How to Replace the Window Regulator on the Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the window regulator on the Fiat Grande Punto, loosen the screws that secure the door panel corresponding to its housing: these screws wil…
How to Remove the Front Seat from a Fiat Grande Punto
How to Remove the Front Seat from a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this guide, you will discover the instructions that will allow you to remove and possibly repair or replace the front seat of the Fiat Grande Punt…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos