Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

Briefly follow the instructions to remove and replace the door panel of the Fiat Grande Punto, as well as the Punto Evo. First, open the door and begin unscrewing the fastening screws located on the opening handle and the grab handle, removing the plastic covers.

Then, lever the side of the panel to detach and remove it, disconnecting the handle cable and removing the window lift handle or button, as shown in the video.

Finally, refit the door panel by applying the reverse procedure!


Updated on 2 August 2026 by ScegliAuto


Related tutorials

Removing the Front Left Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Removing the door panel from a Fiat Grande Punto. Follow these steps. Before starting the removal work, disconnect the battery terminals located in t…
How to Replace the Door Panel on a Fiat Grande Punto
How to Replace the Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the door panel on a Fiat Grande Punto, first disconnect the battery terminals located in the engine bay. Start disassembly: use a lever to…
How to Remove the Front Left Door Panel on a Fiat Grande Punto
How to Remove the Front Left Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the front left door panel on a Fiat Grande Punto? Here's how to proceed: before starting the disassembly work, disconnect the battery t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos