Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Panel on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

To replace the door panel on a Fiat Grande Punto, first disconnect the battery terminals located in the engine bay. Start disassembly: use a lever to remove the manual window winding handle (switch panel), then use a screwdriver to unscrew the securing screws on the plastic panel.

Once all screws are removed, use the lever to detach all the plastic clips securing the door.

Remove the door panel, disconnect any power connectors and release cable. Perform necessary maintenance inside the door and reassemble it.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Fiat Grande Punto
How to Remove the Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide outlines the steps to remove and replace the front door panel of a Fiat Grande Punto, as well as the Punto Evo. First, open the front door…
Removing the Door Panel of the Fiat Grande Punto
Removing the Door Panel of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Briefly follow the instructions to remove and replace the door panel of the Fiat Grande Punto, as well as the Punto Evo. First, open the door and beg…
How to remove the front door panel of the Fiat Grande Punto
How to remove the front door panel of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's instructions will show you how to remove and replace the front door panel of the Fiat Grande Punto, as well as the Punto Evo. First, open the…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos