Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

A small modification to improve the performance of a Fiat Singlepoint engine.

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine

See other generations:
Video tutorial

In this video, we see an easy, small modification for Fiat cars, but it is limited to single-point engines: such as the Uno Fire, the Panda Fire, the Punto 176, the 500 704 cc and 1.1 Fire, and the first series Tipo. It is not applicable to multipoint engines.

We need to remove the air filter, underneath which we find the throttle body that we will need to clean well, remove the upper part of the fuel filter, and disconnect the plugs.

Above the throttle body, we find a sort of screw that is nothing more than the injector; we turn the screw half a turn to tighten it, and then we reassemble everything. And then when we test the car, we can definitely appreciate the difference.


Posted on 9 January 2026 by ScegliAuto


Related tutorials

How to Improve the Plastics of the Fiat Grande Punto
How to Improve the Plastics of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, the YouTuber recommends an excellent product for long-term improvement of the exterior plastics of the Fiat Grande Punto, which, due t…
How to Replace the Battery in a Fiat Grande Punto
How to Replace the Battery in a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To change the battery in a Fiat Grande Punto, open the front bonnet: the battery is located directly in front of the driver, between the engine block…
Where to Find the Fuse Box on a Fiat Punto
Where to Find the Fuse Box on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If you are experiencing issues with one or more electrical components of your Fiat Punto, you will likely need to directly address the fuses with mai…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos