Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Fuel Filter on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuel filter

See other generations:
Video tutorial

Let’s see how to replace the fuel filter on a Fiat Grande Punto and Punto Evo: before starting, clean the fuel line fittings well to prevent dirt from entering the system. Loosen the clip or support holding the filter in place.

Pull the filter from its housing, remove the old o-ring, and replace it with a new one. If your model is equipped with a fuel pressure sensor, refit it onto the new filter, which can be found on auto-doc. It has EAN code 5902048186645 at a price of £17.99 + £9.95 for shipping.

Secure the sensor support and position the new filter in the housing.

Tighten the mounting clip to secure the filter. Once fitted, start the engine and let it run for a few minutes to check for leaks and ensure the system is pressurised correctly.


Posted on 16 February 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will see the steps to change the timing belt on a Fiat Grande Punto or Punto Evo with a 1.2 petrol engine. First, lift the vehicle…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to disassemble and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as on the Punt…
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will learn how to remove and clean the throttle body on a Fiat Grande Punto 1.4 Petrol. First, open the bonnet of your ca…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the petrol filter located in the Fiat Punto 1.2 8v? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos