Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the LPG Filter on a Fiat Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Fuel filter

Here’s how to remove the LPG filter on a Fiat Punto Evo. Open the boot lid and close the LPG valve (where the LPG cylinder is located). Lift the front bonnet of the car, locate the LPG filter as shown in the video. Using a socket wrench, unscrew the bolt that secures the plate to the LPG filter. Remove the LPG filter from the vehicle, disconnect the circulation hoses (replace it with a new one). Finally, reattach the LPG filter to the metal plate (connect the hoses and cables) and tighten the appropriate bolts. Close the front bonnet.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Filter on a Fiat Punto Evo
How to Change the Cabin Filter on a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to change the air conditioning pollen filter on a Fiat Punto Evo? Remove the plastic cover of the centre tunnel (right side of the tunnel), then …
How to Replace the Diesel Filter on a Fiat Punto Evo 1.3 MultiJet
How to Replace the Diesel Filter on a Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will see how to remove and replace the diesel filter on a Fiat Punto Evo 1.3 MultiJet, as well as on the Grande Punto. First, open…
How to Replace the LPG Filter on a Fiat Punto Evo 1.4
How to Replace the LPG Filter on a Fiat Punto Evo 1.4
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's tutorial, you will see the instructions to remove and replace the LPG (gas) filter on the Fiat Punto Evo with a 1.4 engine. First, open th…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the petrol filter located in the Fiat Punto 1.2 8v? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos