Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Filter on a Fiat Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Cabin air filter

How to change the air conditioning pollen filter on a Fiat Punto Evo? Remove the plastic cover of the centre tunnel (right side of the tunnel), then remove the plastic cover from the filter cap (located inside the centre tunnel), and extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the housing: refit the filter cap and secure the container (close the glove compartment located in the centre tunnel). Check the correct installation of the previously fitted parts.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter of the Fiat Grande Punto
How to Replace the Cabin Air Filter of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this brief and simple guide, you will see the steps to remove and replace the cabin air filter of the Fiat Grande Punto, as well as the Punto Evo.…
How to Replace the Pollen Filter on a Fiat Punto
How to Replace the Pollen Filter on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to replace the pollen filter on a Fiat Punto? Follow these steps for removal: use a plastic lever to detach the covering located at the bottom of…
How to Change the LPG Filter on a Fiat Punto Evo
How to Change the LPG Filter on a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Here’s how to remove the LPG filter on a Fiat Punto Evo. Open the boot lid and close the LPG valve (where the LPG cylinder is located). Lift the fron…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the cabin filter on the Fiat Grande Punto? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos