Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the storage compartment in the Fiat Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Glove compartment

See other generations:
This video is currently unavailable

In this tutorial we can see how to disassemble the glove compartment in the Fiat Punto, an extremely simple and fast operation, to be carried out for example in case we need to replace the cabin filter. First of all, go to the passenger side, then open the compartment and empty it. Next, locate the pin on the right inner wall, extract it using a flat tip screwdriver and detach the drawer from the dashboard by pressing the same wall inwards.

At this point, we can place the replacement part and reassemble everything following the reverse procedure.


Posted on 13 December 2024 by ScegliAuto


Related tutorials

Where is the cabin air filter of the Fiat Grande Punto located?
Where is the cabin air filter of the Fiat Grande Punto located?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The cabin air filter has the function of preserving the health of the driver and occupants of the vehicle by allowing the air conditioning system to …
How to install a light in the glove compartment of the Fiat Grande Punto
How to install a light in the glove compartment of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) As strange as it may seem, the glove compartment of the Fiat Grande Punto does not have a courtesy light, but the youtuber will help you install one:…
How to replace the cabin air filter of the Fiat Punto
How to replace the cabin air filter of the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The cabin air filter of the Fiat Punto series 3 is located inside the cabin under the passenger side glove compartment. To replace the filter, it is …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos