Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on the Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

See other generations:
Video tutorial

If the battery on the Fiat Punto is flat and does not hold charge after attempts to recharge, it needs to be replaced. Open the bonnet and disconnect the negative terminal, followed by the positive terminal.

Remove the bolt at the base that secures the hold-down strap. You can now lift out the old battery using its handle.

Retrieve the side protection to fit onto the new battery, thoroughly clean the battery tray, refit it, and position the new battery. Remove the vent caps, refit the hold-down strap, and connect the terminals, starting with the positive.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

Replacing the Battery of the Fiat Grande Punto
Replacing the Battery of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's procedure will show you how to remove and replace the battery of the Fiat Grande Punto, as well as the Punto Evo. First, open the bonnet of t…
Replacing the Battery on Fiat Punto
Replacing the Battery on Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replacing the battery is a straightforward procedure on almost all car models, including Fiat. With the engine off and the handbrake engaged, lift th…
Where to Find the Fuse Box on a Fiat Punto
Where to Find the Fuse Box on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If you are experiencing issues with one or more electrical components of your Fiat Punto, you will likely need to directly address the fuses with mai…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos