Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery of the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Battery

Today's procedure will show you how to remove and replace the battery of the Fiat Grande Punto, as well as the Punto Evo. First, open the bonnet of the vehicle and start by removing the central battery strap. Then disconnect both terminals (positive and negative), finally unscrewing the bolt of the battery bracket to remove it from its compartment, as illustrated in the video. At this point, install the new battery of the correct type and with the same amperage; secure it properly and connect the electrical terminals!

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the starter motor of the Fiat Grande Punto 1.3 Multijet
Guide to replacing the starter motor of the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's main instructions will show us how to disassemble and replace the starter motor of the Fiat Grande Punto 1.3 Multijet. First, we open the hoo…
How to Replace the Battery in a Fiat Grande Punto
How to Replace the Battery in a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The battery in your Fiat Grande Punto is undoubtedly one of the most important components, and its replacement, contrary to what one might think, is …
How to Change the Key Battery of a Fiat Grande Punto
How to Change the Key Battery of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this brief tutorial, you will learn how to change the remote battery of a Fiat Grande Punto. Start the procedure by releasing the ignition key fro…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos