Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Lights on Fiat Grande Punto - Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

In today's video, you will learn how to remove and replace the rear lights on a Fiat Grande Punto and Punto Evo by following these simple steps. First, open the boot and unscrew the fixing screws for the lights found on the sides; then take the top part of the light and gently unclip it to remove it, as shown in the video.

At this point, disconnect the power connector and proceed with the replacement of the lights (in this case, those from the Punto Evo on the Grande Punto); apply the reverse procedure for reassembly!


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to Activate the Front and Rear Fog Lights of the Fiat Grande Punto
How to Activate the Front and Rear Fog Lights of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) .. rear, of the Fiat Grande Punto, as well as the Punto Evo. First, get in the vehicle and start the engine; then, you will find the light and menu controls.. …
How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) .. and replace the rear light of the Fiat Punto Evo, as well as the Grande Punto. First, open the tailgate and begin by unscrewing the screws.. …
How to Change the Rear Brake Shoes on a Fiat Grande Punto - Punto Evo
How to Change the Rear Brake Shoes on a Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) .. shoes on a Fiat Grande Punto, as well as on the Punto Evo. First, lift the vehicle and remove the rear wheel; then proceed to remove the drum using.. …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos