Do it yourself
Frequently asked questions about cars and motorcycles

How to Activate the Front and Rear Fog Lights of the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In this brief and simple guide, follow the steps to activate and deactivate the fog lights, both front and rear, of the Fiat Grande Punto, as well as the Punto Evo. First, get in the vehicle and start the engine; then, you will find the light and menu controls on the left side of the steering wheel, as shown in the video.

At this point, press the upper button to turn on the rear fog lights; use the lower button to activate the front fog lights.

Press the button again to deactivate the fog lights!


Updated on 26 June 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before starting, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrument panel by turning the key in the ignition swit…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The following steps will show you how to activate and connect the Bluetooth system on a Fiat Grande Punto, as well as on the Punto Evo. First, get in…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos