Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the airbag and steering wheel of the Fiat Grande Punto.

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Steering wheel

See other generations:
Video tutorial

Today we will look at the instructions on how to disassemble and replace the steering wheel and its airbag on the Fiat Grande Punto and Punto Evo. First, let's get inside the vehicle and start by removing the airbag from the steering wheel by pushing on the back holes and disconnecting the electrical connector to take it out; then we will unscrew the central screw of the steering wheel to remove it, as shown in the video.

At this point, we install the new steering wheel in a perfectly straight position, and lastly, we install and connect the airbag; we will also connect the electrical controls on the steering wheel if they are present.


Posted on 28 November 2025 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel and Power Steering Motor from a Fiat Grande Punto?
How to Remove the Steering Wheel and Power Steering Motor from a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the steering wheel from the Fiat Grande Punto, first remove the airbag: insert the appropriate keys into two holes located at the back of t…
How to Remove the Steering Wheel from a Fiat Grande Punto?
How to Remove the Steering Wheel from a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the steering wheel from a Fiat Grande Punto, loosen the two screws located at the back of the steering wheel, on the right and left sides. …
How to Replace the Steering Angle Sensor on the Fiat Grande Punto?
How to Replace the Steering Angle Sensor on the Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the steering angle sensor on the Fiat Grande Punto, completely disassemble the steering wheel by removing the airbag located at the centre…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos