Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Steering Angle Sensor on the Fiat Grande Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the steering angle sensor on the Fiat Grande Punto, completely disassemble the steering wheel by removing the airbag located at the centre and then unscrewing the bolt that secures the steering wheel itself. This will allow access to the component located behind the steering wheel, so that the sensor inside can be extracted from its housing and disconnected from the corresponding connector.

At this point, insert the new sensor into its housing, connecting it properly. After replacing the sensor, reinstall the steering wheel.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the oil pressure switch on a Fiat Grande Punto, open the bonnet to access the engine compartment. The pressure switch is located at the bo…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, learn how to remove and replace the steering column of the Fiat Grande Punto, as well as the Punto Evo. First, get inside the…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, we will look at a reason why the ESP light may come on in the Fiat Grande Punto. The reason is a broken wire (specifically, the ground…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos