Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Oil Pressure Switch on a Fiat Grande Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Checks and maintenance

To replace the oil pressure switch on a Fiat Grande Punto, open the bonnet to access the engine compartment. The pressure switch is located at the bottom, near the oil filter: it consists of a bolt with an internal electrical sensor and will be connected to a connector. To remove it, you will need to disconnect the connector and loosen the bolt on the outside. This will allow the sensor to be removed and replaced with a new spare part: it should be screwed in with the appropriate spanner and connected to its connector.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To remove the oil pressure sensor on the Fiat Punto, first open the bonnet and disconnect the mass air flow connector. Next, disconnect the hoses to …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the steering angle sensor on the Fiat Grande Punto, completely disassemble the steering wheel by removing the airbag located at the centre…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Lift the bonnet and insert the support rod. First, remove the air box by unscrewing the three screws and removing the clip. The "absolute pressure" s…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What problem does the Fiat Punto have with the "city mode"? Read answer
    • Punto 2005-2018 - How to bleed the Fiat Punto clutch pedal? Read answer
    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer
    • Punto 1999-2011 - How does the air conditioning of the Fiat Punto work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos