Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the engine oil pressure switch on a Honda Stream.

Model: Honda Stream RN1, RN3, RN5, RN2, RN4 - Years 2000-2006
Part: Oil pressure switch

Let's see in this guide how to disassemble and replace the engine oil pressure switch of the Honda Stream. First, we open the car's hood and begin by disconnecting the electrical connector of the engine oil pressure sensor; we then use a 24 mm socket wrench with an extension to unscrew the engine oil pressure switch (with the engine cold), as shown in the video. At this point, we install the new original engine oil pressure switch, making the electrical connection; we top up any lost engine oil if necessary.

Posted on 24 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Honda Stream (2000-2006 / RN1, RN3, RN5, RN2, RN4) These brief and simple steps will show you how to remove and replace the standard radio from the Honda Stream. First, get inside the vehicle and star…
Honda Stream (2000-2006 / RN1, RN3, RN5, RN2, RN4) Knowing the exact location of the OBD2 port in your 2005 Honda Stream allows you to easily connect any compatible diagnostic tool to access the data …

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos