Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the oil pressure switch of the Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Oil pressure switch

See other generations:
Video tutorial

Today we will explain how to replace the oil pressure switch on a Volkswagen Polo car produced from 2002 to 2009. To perform the replacement, we need to open the front hood and disconnect the air tube connector; after removing the connector, we can remove the engine cover, releasing the sides individually and then removing the entire cover.

To remove the switch, we need to disconnect the connector and use a 24mm key to loosen the nut and then unscrew it by hand.

Once the switch is removed, we need to replace it with the model required by the manufacturer, in the case of the Polo the model is 036919081D. We insert the new switch into its seat and screw the nut using a 24 mm key, connect the connector and mount the engine cover.

Connect the air tube connector and close the front hood.


Posted on 20 February 2025 by ScegliAuto


Related tutorials

How to Replace the Oil Pressure Sensor of the Volkswagen Polo?
How to Replace the Oil Pressure Sensor of the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the oil pressure sensor of the Volkswagen Polo, open the bonnet to access the components in the engine bay. First, remove the plastic prot…
How to Reset the Tyre Pressure Warning Light on the Volkswagen Polo?
How to Reset the Tyre Pressure Warning Light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) You can completely eliminate the tyre pressure warning light that appears on the instrument panel of the Volkswagen Polo by inflating the tyres to th…
Where is the oil pressure sensor located in the Volkswagen Polo?
Where is the oil pressure sensor located in the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this video, you can see where the engine oil pressure sensor is located in the Volkswagen Polo and how to proceed if you need to replace it, a ver…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos