Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the oil pressure sensor located in the Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you can see where the engine oil pressure sensor is located in the Volkswagen Polo and how to proceed if you need to replace it, a very simple and quick operation. As shown, the sensor is positioned at the left front of the engine, right next to the exhaust manifold.

To replace the sensor, first ensure the engine is completely cold, then locate the green connector and disconnect it. Next, loosen the sensor using a spanner, remove it from its housing, and fit the replacement by following the reverse procedure.


Updated on 26 August 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Pressure Sensor of the Volkswagen Polo?
How to Replace the Oil Pressure Sensor of the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the oil pressure sensor of the Volkswagen Polo, open the bonnet to access the components in the engine bay. First, remove the plastic prot…
How to Reset the Tyre Pressure Warning Light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To reset the tyre pressure warning light on the Volkswagen Polo, turn on the instrument cluster by turning the key in the ignition switch: once it is…
Where is the camshaft position sensor located in the Volkswagen Polo?
Where is the camshaft position sensor located in the Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) In this video, you can see where the camshaft position sensor is located in the Volkswagen Polo and how to proceed if you need to replace it, which i…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos