Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats in a Volkswagen Polo Vivo?

Model: Volkswagen Polo Polo VI, Polo 6, MK 6, AW1, MK VI - Years 2017-2025
Part: Seat

In this tutorial, see how to remove the rear seats in a Volkswagen Polo Vivo, a very simple and quick operation. First, open both rear doors and the boot lid, then grip the seat base, lift it upwards, and unclip it from the base. Next, remove the plastic cover of the rear bracket, unscrew the exposed screw using an Allen key, and using a flathead screwdriver, unclip the two side pins by levering in the indicated gap. At this point, simply extract the backrests from the cabin and install any replacements by following the reverse procedure.

Posted on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Volkswagen Polo Vivo
How to Replace the Headlight Bulb on a Volkswagen Polo Vivo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) The video shows the DIY replacement of the headlight bulb on a Volkswagen Polo Vivo (the South African version of the Volkswagen Polo MK4). The YouTu…
How to remove the rear seats of the Volkswagen Polo?
How to remove the rear seats of the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) The procedure for removing the rear seats of the Volkswagen Polo involves prising up the front of the seats so that the underlying fastening clips ca…
How to Fold Down the Rear Seats on a Polo
How to Fold Down the Rear Seats on a Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) How to fold down the rear seats of the Volkswagen Polo? Let's see how to do it inside the vehicle. Open the door and lift the seat base of the rear s…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos