Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Rear Seats of the Volkswagen Polo

Model: Volkswagen Polo Polo 3, MK III, 6N, Polo III, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Seat

See other generations:
Video tutorial

Today's guide illustrates the procedure to remove the rear seats of the Volkswagen Polo, following these simple steps. First, open the doors and start by removing the bench seat, pulling it upwards and out of the cabin; then unscrew the fixing screws of the backrests, which are located at the base, as shown in the video.

If necessary, also remove the seatbelt attachments; perform cleaning or replacement of the seats or upholstery if needed, applying the reverse procedure for reassembly!


Updated on 7 September 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) .. The procedure for removing the rear seats of the Volkswagen Polo involves prising up the front of the seats so that the.. …
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) How to fold down the rear seats of the Volkswagen Polo? Let's see how to do it inside the vehicle. Open the door and lift the seat base of the rear s…
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this video tutorial, learn how to lower or recline the rear seats or backrest on a Volkswagen Polo from 2009 to 2017 in simple steps. See how to c…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos