Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front seat of the Volkswagen Polo.

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Seat

Today we will see the procedure for removing and replacing the front seat of the Volkswagen Polo, following the instructions below. First, let's open the front door of the vehicle and start unscrewing all the fastening screws we find on the seat rails, moving the seat back and forth to access them; then we disconnect the electrical connector located underneath, allowing us to remove the seat from the cabin, as shown in the video. At this point, we perform the repair or replacement of the front seat, and finally make the necessary adjustments.

Posted on 9 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front seat of the Volkswagen Polo
How to disassemble the front seat of the Volkswagen Polo
Volkswagen Polo (1981-1994 / MK 2, Polo 2, Polo II, 86C) The steps outlined in this guide will show us how to disassemble and replace the front seat of the Volkswagen Polo. First, we open the front door on …
Removing the Front Seat of the Volkswagen Polo
Removing the Front Seat of the Volkswagen Polo
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) Follow the steps necessary to remove and replace the front seat of the Volkswagen Polo, as outlined below. First, open the front door and start unscr…
Removing the Front Seat from the Volkswagen Polo
Removing the Front Seat from the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this video tutorial, learn how to remove the front seat from the Volkswagen Polo, following the instructions below. First, open the front door and…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos