Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Disassembly of the front seat of the Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Seat
Operation: Disassembly of the front seat of the Volkswagen Polo

In this video tutorial we will see how to remove the front seat of the Volkswagen Polo, following the instructions below. First we open the front door and start unscrewing all the fixing screws that we find on the guides of the front seat; we move the front seat back and forth to be able to access all the screws to unscrew, as shown in the video. At this point we disconnect the electrical connector that we find under the seat; we just have to remove it permanently from the car, applying the reverse procedure to refit the seat!


Posted on 9 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How do you remove the rear seats of the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - How to remove the front seat from Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos