Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to fold the rear seats on the Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, MK 5, Polo V, Polo 5, 6R - Years 2009-2017
Part: Seat
Operation: How to fold the rear seats on the Polo

How to fold the rear seats of the Volkswagen Polo? Let's see how they roll over inside the vehicle. We open the door and raise the seat of the rear seats. Open the tailgate and remove the panel, pull the lever located in the seat backrest, tilt the backrest forward: let it rest on the seat of the seat itself. We carry out the same operations on the other rear seats of the car (unless the seat is whole and not divisible). If we want to overturn the front seat to get more space: press the lever next to the seat and lower it until it rests on the seat of the same. We raise the backs of the rear seats and then the seat. We mount the panel at the end.


Posted on 18 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How do you remove the rear seats of the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - How to remove the front seat from Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos