Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Volkswagen Polo?

Model: Volkswagen Polo Polo V, MK 5, MK V, Polo 5, 6R - Years 2009-2017
Part:

You can completely eliminate the tyre pressure warning light that appears on the instrument panel of the Volkswagen Polo by inflating the tyres to the optimal pressure value: this value will be indicated on the sticker attached to the driver's door pillar. Once the tyres have been restored to the correct pressure, open the glove compartment located on the passenger side: inside, there will be a SET button that must be held down for a few seconds until the warning light resets. After completing the operation, you can switch off the display by removing the key.

Posted on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Volkswagen Polo?
Volkswagen Polo (2017-2025 / AW1, MK 6, MK VI, Polo 6, Polo VI) In order to reset the tire pressure warning light of the Volkswagen Polo, you need to inflate the tires to the correct pressure value: once they are …
How to reset the tire pressure sensor of the Volkswagen Polo
How to reset the tire pressure sensor of the Volkswagen Polo
Volkswagen Polo (2017-2025 / AW1, MK 6, MK VI, Polo 6, Polo VI) The steps outlined in this guide will show us how to reset the tire pressure warning light (TPMS) of the Volkswagen Polo; before performing the reset…
How to reset the tire pressure warning light on Volkswagen Polo
How to reset the tire pressure warning light on Volkswagen Polo
Volkswagen Polo (2017-2025 / AW1, MK 6, MK VI, Polo 6, Polo VI) We see in this video the procedure necessary to reset the tire pressure warning light (TPMS) of the Volkswagen Polo; before performing the reset oper…

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Renault Modus

Before starting, open the bonnet of your Renault Modus. Begin by removing the front bumper, unscrewing the screws and bolts. Next, remove the headlamp by unscrewing the fixing bolts and disconnecting the electrical connector. Once done, unclip the bulb cover, then rotate the base of the blown bulb anti-clockwise and finally extract it from its housing. At this point, disconnect the corresponding electrical connector to complete the removal. To fit the new bulb, follow these steps in reverse, and the replacement will be complete.

Watch the video!


by ScegliAuto

More videos