Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the glove compartment drawer of the Volkswagen Polo

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Glove compartment

Below we will see the steps that will allow us to disassemble and replace the glove box of the Volkswagen Polo. First of all, we get on board the car and start by opening the glove box on the passenger side; then we unscrew all the fixing screws that we find inside it, placed on the sides, as shown in the video. At this point, we remove the glove box and disconnect the electrical connector of the compartment light, then carry out the repair or directly the replacement; we then reassemble the glove box, applying the reverse procedure!

Posted on 19 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fan resistor of the Volkswagen Polo 9N
How to replace the fan resistor of the Volkswagen Polo 9N
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) This is not a video, but a series of photos, which still allow us to see in detail how to replace the fan resistor of a Volkswagen Polo 9N, which is …
How to disassemble the storage drawer of the Volkswagen Polo
How to disassemble the storage drawer of the Volkswagen Polo
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) Following these brief and simple steps, we will see the disassembly and replacement of the glove box drawer of the Volkswagen Polo. First, we get int…
How to Remove the Glove Box of the Volkswagen Polo
How to Remove the Glove Box of the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Today, follow these instructions to remove and replace the glove box of the Volkswagen Polo in simple and quick steps. First, get inside the cabin an…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos