Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Fiat Grande Punto 1.3 Multijet engine oil and oil filter replacement

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Oil filter
Operation: Fiat Grande Punto 1.3 Multijet engine oil and oil filter replacement

Below we will find out how to carry out the routine maintenance service, replacing the engine oil and oil filter of the Fiat Grande Punto 1.3 Multijet, but also of the Punto Evo. First we raise the car and start unscrewing the vent bolt of the the oil that we find on the cup, letting it drain in a container for about ten minutes; then unscrew the oil filter cartridge, located at the bottom of the engine compartment, using a socket wrench with extension. At this point we install the new oil filter and pour the right amount of engine oil, having the right characteristics!


Posted on 13 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the oil filter on Fiat Punto? Read Answer
    • Punto 2005-2018 - Where is the Fiat Grande Punto oil filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos