|
Do it yourself
| |||
| ||||
How to change the oil and filter on the Fiat Punto 2 gasoline.
Model: Fiat Punto
MK 2, 188
- Years 1999-2011
In this video, let's see how to change the engine oil and filter on the Fiat Punto MK2: we open the oil filler cap and add a cleaner along with the used oil to improve its drainage. We can find it with the code B001CZSG94 on Amazon for the price of 15.78 euros, with free delivery for Prime customers. We raise the front of the vehicle to access the drain bolt, under which we place a large container to collect the used oil, which we will then dispose of properly at an authorized center. We replace the bolt with a new one and close it, then position the container under the filter and loosen it, allowing the oil to drain into the container. We take the new filter and lubricate the gasket with some new oil, then put it back in place. We lower the car and refill the oil with the type recommended by the manufacturer, up to 90% of the capacity. We insert the dipstick and measure again, then top up if necessary. We close the cap and let the engine run at idle for a few minutes, then we measure the level again.
Posted on 17 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
Today, you will learn how to change the engine oil and oil filter on the Fiat Punto Evo 1.3 MultiJet, as well as on the Fiat Grande Punto. First, ope…
Fiat Punto
(1993-1999 /
MK 1, 176)
Today, this brief guide will show you how to change the engine oil and oil filter on your Fiat Punto. It is not a very complex operation; just be car…
Fiat Punto
(1999-2011 /
MK 2, 188)
Briefly review the steps to perform the routine maintenance service by replacing the engine oil and oil filter of the Fiat Punto. First, raise the ve…
Other guides you may be interested in
|
How to Open the Bonnet of a Renault Megane if the Lever is Broken?
If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.867
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |