Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change for 1300 MultiJet

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Engine oil

How to change the engine oil on a 1300 MultiJet engine? Let's see the procedure on a Fiat Punto. Open and lift the front bonnet, securing it in place. Using a socket spanner, undo the large securing bolt of the container cap where the oil filter is located. Remove the worn oil filter, unscrew the drain plug from the oil sump (let the used oil drain into a container), and then refit it. Install a new filter in the container, ensuring it adheres well around the walls. Replace the engine oil by raising the car with a jack. Unscrew the drain plug. Fill the oil sump with new oil.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, you will learn how to change the engine oil and oil filter on the Fiat Punto Evo 1.3 MultiJet, as well as on the Fiat Grande Punto. First, ope…
Replacing the Oil Filter on a Fiat Punto 1.3 MultiJet
Replacing the Oil Filter on a Fiat Punto 1.3 MultiJet
Fiat Punto (1999-2011 / MK 2, 188) In this video, you will learn how to remove the oil filter from a Fiat Punto powered by a 1.3 MultiJet engine; consequently, an oil change will also …
Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Follow these steps to carry out the routine maintenance service by replacing the engine oil and oil filter of the Fiat Grande Punto 1.3 Multijet, as …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos