Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Oil Filter on a Fiat Punto 1.3 MultiJet

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Oil filter

See other generations:
Video tutorial

In this video, you will learn how to remove the oil filter from a Fiat Punto powered by a 1.3 MultiJet engine; consequently, an oil change will also be performed. First, lift the vehicle and unscrew the oil drain plug: allow the old oil to drain for more than ten minutes into a container.

Next, replace the oil plug and remove the filter: to do this, unscrew the bolt with a ratchet spanner and pull off the filter cover; then, use a spanner to unscrew the central bolt and extract the filter, replacing it with a new one.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, you will learn how to change the engine oil and oil filter on the Fiat Punto Evo 1.3 MultiJet, as well as on the Fiat Grande Punto. First, ope…
Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Follow these steps to carry out the routine maintenance service by replacing the engine oil and oil filter of the Fiat Grande Punto 1.3 Multijet, as …
How to Change the Engine Oil and Oil Filter of the Fiat Punto Evo 1.3 MultiJet
How to Change the Engine Oil and Oil Filter of the Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide outlines the procedure for replacing the engine oil and oil filter while performing the regular maintenance service for the Fiat Punto Evo…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos