Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Fiat Grande Punto 1.2 8V.

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Oil filter

The information provided in this guide will show us how to perform the regular maintenance service, replacing the engine oil and oil filter, of the Fiat Grande Punto 1.2 8V. First, we lift the vehicle and start by loosening the oil drain plug located under the engine, letting it drain into a container for about ten minutes; then we use the appropriate wrench to remove the oil filter located next to the sump, replacing the cartridge with a new one. At this point, we unscrew the filler cap to top up the oil, pouring the right amount!

Posted on 21 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter of the Fiat Punto Evo 1.3 MultiJet
How to Change the Engine Oil and Oil Filter of the Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide outlines the procedure for replacing the engine oil and oil filter while performing the regular maintenance service for the Fiat Punto Evo…
Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, you will learn how to change the engine oil and oil filter on the Fiat Punto Evo 1.3 MultiJet, as well as on the Fiat Grande Punto. First, ope…
Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Follow these steps to carry out the routine maintenance service by replacing the engine oil and oil filter of the Fiat Grande Punto 1.3 Multijet, as …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos