Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fog Light Fuse in the Fiat Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Fog lights

If the fog lights on your Fiat Punto suddenly stop working, and the bulbs are intact, first check the status of the respective fuse. As shown in this video, it is located in the box inside the engine compartment, near the battery, and is labelled F30. Its amperage is 15A. If faulty, ensure you replace it with a fuse of the same specifications and work with the vehicle turned off to avoid damaging any connected devices.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Check Fog Light Preparation on Fiat Punto Evo
Check Fog Light Preparation on Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To check if your Fiat Punto Evo is already prepared for fog light installation, start by inspecting the engine bay for connectors corresponding to th…
How to Activate the Front and Rear Fog Lights of the Fiat Grande Punto
How to Activate the Front and Rear Fog Lights of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this brief and simple guide, follow the steps to activate and deactivate the fog lights, both front and rear, of the Fiat Grande Punto, as well as…
Replacing the Fog Light Bulbs on a Grande Punto
Replacing the Fog Light Bulbs on a Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to dismantle the front fog light on a Grande Punto? Lift the front bonnet to access the headlights. Remove the plastic cover at the bottom of the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos