Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Check the preparation of the fog lights on the Fiat Punto Evo

Fiat Punto - Video tutorial

Model: Fiat Punto Grandepunto , MK 3, 199, Punto EVO - Years 2005-2018
Part: Fog lights
Operation: Check the preparation of the fog lights on the Fiat Punto Evo

To check if your Fiat Punto Evo is already prepared for the installation of the fog lights, or that it is equipped with the relative wiring, you will start by checking whether the sockets to be connected to the headlights themselves; at this point the fuse box near the battery compartment will be inspected to ascertain the presence of the protection fuse (F31) and of the relay (T14); you will then move on to the push-button panel located under the side air vent, on the driver's side: even without removing it from its seat, just disconnect the socket and check that it has 7 cables, or 7 pins.


Posted on 30 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the fog light located in a Fiat Punto? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos