Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fog Light on a Fiat Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Fog lights

This video shows how to remove the fog light with bulb on a Fiat Punto Evo. Prepare to remove the side fog light located on the bumper: unscrew the fastening screw of the fog light's plastic cover using a suitable screwdriver, then remove it from the bumper using a lever. Once the plastic is removed, unscrew the screws of the fog light and extract it from the car's bumper (disconnect the power cable). Fit the new part with a new bulb (same size and voltage). Test the correct functioning of the fog light after installation.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Activate the Front and Rear Fog Lights of the Fiat Grande Punto
How to Activate the Front and Rear Fog Lights of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this brief and simple guide, follow the steps to activate and deactivate the fog lights, both front and rear, of the Fiat Grande Punto, as well as…
How to Remove the Fog Light on a Fiat Punto Evo
How to Remove the Fog Light on a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Learn how to remove the fog light along with the bulb on a Fiat Punto Evo. Start by removing the side fog light located on the bumper: unscrew the se…
Removing Fog Light with Bulb from a Fiat Grande Punto Evo
Removing Fog Light with Bulb from a Fiat Grande Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, learn how to remove the fog light with bulb from a Fiat Grande Punto Evo. Start by removing the plastic grille frame around the side f…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos