Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the aux cable predisposition on the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Car stereo

Today we will see the instructions that will allow us to install the aux cable predisposition on the Fiat Grande Punto car radio, as well as on the Punto Evo. First of all, we get on board the car and start by disassembling and removing the original car radio, using the appropriate extraction tools; then we connect the cable prepared for the aux input on the back, as shown in the video. At this point, we can reinstall the car radio and check the output function of the aux cable, selecting the appropriate mode on the car radio, following the video tutorial until the end!

Posted on 1 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Aux Cable on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To install an Aux cable on the radio of a Fiat Grande Punto, start by removing the radio using the clips provided with the Aux cable; insert the clip…
How to Install the Aux-in Cable on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, see how to install the Aux-in cable on the Fiat Grande Punto: It is important to know that you must use a cable with a yellow connecto…
How to Install an AUX-IN Socket on the Fiat Grande Punto
How to Install an AUX-IN Socket on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you can see how to easily install an AUX-IN socket on the Fiat Grande Punto. You can easily obtain it from any e-commerce site; for ex…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos