Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fog Light Bulbs on a Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fog lights

See other generations:
Video tutorial

How to dismantle the front fog light on a Grande Punto? Lift the front bonnet to access the headlights. Remove the plastic cover at the bottom of the front bumper: take off the cover where the fog light is mounted.

After removing the cover, unscrew the securing screws of the fog light and remove it. Connect the new fog light with the respective electrical connectors, then secure it in the front bumper. Refit the plastic cover in the front bumper.

Turn on the fog lights to check their operation.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Light Bulb on a Fiat Grande Punto
How to Replace the Fog Light Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replace the fog light bulbs if they are blown. Here’s how to replace them from the fog light. Remove the plastic cover at the bottom of the bumper us…
How to Activate the Front and Rear Fog Lights of the Fiat Grande Punto
How to Activate the Front and Rear Fog Lights of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this brief and simple guide, follow the steps to activate and deactivate the fog lights, both front and rear, of the Fiat Grande Punto, as well as…
How to Replace the Fog Light Bulb on the Fiat Grande Punto
How to Replace the Fog Light Bulb on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide shows how to replace the fog light bulb on the Fiat Grande Punto. The bulb replacement is very simple as you need to disconnect the power …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos