Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the indicator light bulb of the front headlight of the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Light bulb

In these brief instructions, we will see how to disassemble and replace the turn signal bulb of the front headlight of the Fiat Punto. First, open the hood and start unscrewing the plastic screw behind the headlight, removing the bulb holder and the turn signal light; disconnect the electrical connector to remove it, as shown in the video. At this point, install the new turn signal bulb, of the correct type and with the same attachment; check its operation and secure the bulb to the optical group by screwing the plastic screw at the back.

Posted on 24 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front indicator bulb on the Fiat Punto?
How to replace the front indicator bulb on the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the front indicator bulb on the Fiat Punto, open the bonnet to access the screws securing the corresponding headlamp from above. Once the …
How do you replace the front headlight bulb of the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to replace the headlight bulb of the Fiat Punto, you need to open the hood so that you can access the components inside the engine compartme…
How to Replace the Front Headlamp Bulb on a Fiat Punto?
How to Replace the Front Headlamp Bulb on a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the front headlamp bulb on a Fiat Punto, open the bonnet to access the components inside the engine bay. Locate the protective cover of th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos