Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulb on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fog lights

See other generations:
Video tutorial

Replace the fog light bulbs if they are blown. Here’s how to replace them from the fog light.

Remove the plastic cover at the bottom of the bumper using a screwdriver to access the side fog light located in the bumper. After removing the bulb holder, take out the damaged bulb and fit a new one (same size and voltage).

Refit the plastic cover under the car's wing and screw in the securing screws with the screwdriver used earlier. Test the correct operation of the new bulbs by turning on the control switches.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Replace the Fog Light Bulb on a Fiat Grande Punto
Replace the Fog Light Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial, we will go through the steps to remove and replace the fog light bulb on a Fiat Grande Punto, as well as on the Punto Evo. To ac…
How to Install H4 LED Bulbs on the Fiat Grande Punto
How to Install H4 LED Bulbs on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To install an H4 LED bulb (dipped and main beam) on a Fiat Grande Punto, start by removing the rubber cap at the back of the headlamp, disconnect the…
How to Replace the Front Indicator Bulb on a Fiat Grande Punto
How to Replace the Front Indicator Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the front indicator bulb on a Fiat Punto, open the bonnet to access the circular cover inside the headlamp. Once the cover is removed, dis…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos