Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install H4 LED Bulbs on the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

To install an H4 LED bulb (dipped and main beam) on a Fiat Grande Punto, start by removing the rubber cap at the back of the headlamp, disconnect the bulb connector, unclip the spring holding the bulb, and remove the bulb. Take the new bulb, remove it from the packaging, insert it in the same orientation as the old bulb, secure the spring holding the bulb, reconnect the bulb connector, and replace the rubber cap at the back of the headlamp.

Perform the same operation for the other headlamp. Finally, test the new bulbs.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on the Fiat Punto Evo
How to Replace the Front Headlight Bulbs on the Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video tutorial, you will see instructions on how to remove and replace the front headlight bulbs on the Fiat Punto Evo, as well as the Gra…
Replacing Bulbs on Fiat Grande Punto
Replacing Bulbs on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the bulbs on a Fiat Grande Punto: open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate …
How to Replace the Rear Light Units on a Fiat Punto
How to Replace the Rear Light Units on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will learn how to replace the halogen rear lights on the Fiat Punto/Grande Punto with original Fiat LED position light units. You …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos