Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Bulbs on Fiat Grande Punto

Model: Fiat Punto Grandepunto , Punto EVO, MK 3, 199 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

To replace the bulbs on a Fiat Grande Punto: open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap of the headlamp (located at the rear of the headlamp) and remove it. You will find the bulbs with metal clips; pull the bulb holder out of the headlamp and extract the damaged bulb using a screwdriver.

Fit the new bulb/LED (ensuring it is the correct type and size) and insert the bulb holder back into the headlamp housing.

Finally, reassemble the headlamp with the necessary pins and the inspection cap. Test the correct operation of the lights.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / Grandepunto , Punto EVO, MK 3, 199) Replace the bulbs on a Fiat Grande Punto. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the p…
Fiat Punto (2005-2018 / Grandepunto , Punto EVO, MK 3, 199) In this video, discover how to remove and replace the original side indicator bulbs with dynamic ones on the Fiat Grande Punto. To remove the side in…
Fiat Punto (2005-2018 / Grandepunto , Punto EVO, MK 3, 199) In this tutorial video, learn how to remove and replace the front headlight bulbs on the Fiat Grande Punto, as well as the Punto Evo. First, open the…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos