Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Mitsubishi Canter

Model: Mitsubishi Canter MK 7 - Years 2005-2010
Part: Service warning light

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

What are the warning lights and instruments on a Mitsubishi Canter dashboard
What are the warning lights and instruments on a Mitsubishi Canter dashboard
Mitsubishi Canter (2005-2010 / MK 7) The dashboard of your Mitsubishi Canter features the following instruments and warning lights: -Speedometer; -Fuel level gauge; -Tachometer (engine R…
How to replace the alternator of the Mitsubishi Canter 3.0D
How to replace the alternator of the Mitsubishi Canter 3.0D
Mitsubishi Canter (2010-2024 / MK 8) Following the instructions in this guide, we will see how to disassemble and replace the alternator of the Mitsubishi Canter 3.0D. First, open the ho…
How do you replace the timing chain of the Mitsubishi Canter?
How do you replace the timing chain of the Mitsubishi Canter?
Mitsubishi Canter (2010-2024 / MK 8) In order to replace the timing chain of the Mitsubishi Canter, you need to loosen the screws that secure the side panel of the engine block on the ri…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos