Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter in a Mitsubishi Outlander

Model: Mitsubishi Outlander MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Engine oil

See other generations:
Video tutorial

To replace the engine oil and filter in a Mitsubishi Outlander, bring the engine to operating temperature, then turn it off and position the vehicle on a flat surface. Safely lift the car and place a container under the oil sump.

Unscrew the drain plug and allow the used oil to fully drain, then reattach the plug, checking the condition of the gasket and replacing it if necessary. Remove the old oil filter with the appropriate tool and install the new one after lightly lubricating its gasket with clean oil. Pour the new lubricant through the filler neck, adhering to the quantity specified for the installed engine, check the level with the dipstick, and start the engine for a few seconds.

Finally, check for leaks around the filter and drain plug, turn off the engine, wait a few minutes, and recheck the oil level, adding more if necessary.


Posted on 29 June 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter of the Mitsubishi Outlander
How to Replace the Engine Oil and Oil Filter of the Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) In this short and simple guide, you will learn how to perform the routine maintenance service by replacing the engine oil and oil filter of the Mitsu…
How to Replace the Engine Air Filter on a Mitsubishi Outlander 2
How to Replace the Engine Air Filter on a Mitsubishi Outlander 2
Mitsubishi Outlander (2007-2012 / MK 2) If you own a Mitsubishi Outlander Mk2 and need guidance on correctly replacing the engine air filter, you are in the right place. Simply read the ins…
Replacing Air Filter on Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Replace the cabin air filter on a Mitsubishi Outlander if you have covered a considerable distance. Open the car door, pull up the engine compartment…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos